2025 Toro Groundsmaster® 4300/4500/4700 Series 4300 7.5ft (2.3m) (30879)
- Year 2025
- Make Toro
- Model Groundsmaster® 4300/4500/4700 Series
2025 Toro Groundsmaster® 4300/4500/4700 Series 4300 7.5ft (2.3m) (30879)
2025 Toro Groundsmaster® 4300/4500/4700 Series 4300 7.5ft (2.3m) (30879)
The Groundsmaster® 4300-D has a lightweight footprint and CrossTrax™ 4-wheel drive for superior hill-climbing. Each of its five Contour™ Plus cutting units closely follows contours for an even cut on undulating terrain.
Features may include:
Easy Service- Quick and easy access to all major service areas.
- Optimized design and use of lightweight materials means less weight and turf compaction without sacrificing performance and functionality.
- The Groundsmaster® Contour Series mowers provide the productivity you need, no matter the size. Mow up to 10.6 acres (4.3 hectares) per hour to get the job done fast.
- The Contour™ Plus cutting technology takes quality of cut to a whole new level. Air inlet pockets keep the grass standing tall for the cleanest possible cut and a modified rear discharge opening disperses clippings more evenly.
- Convert the standard seat suspension to air-ride for rough applications to provide more comfortable ride for operators logging long hours in the seat.
Engine
Engine Manufacturer
Yanmar®
Cylinder Liners
3-cylinder
Engine Power
43.4 hp (32.4 kW)
Engine Torque, Maximum
88.5 ft.-lbs.
Displacement
91.4 cu. in. (1.5 liter)
Emissions
EPA Tier IV Final and Stage V compliant.
Cooling
Liquid Cooled
Starter
Key Start
Air Filter
Dry, replaceable primary
Drivetrain
Steering
Hydraulic power steering, tilt wheel
Drive System
4WD
Fuel System
Fuel Type
Diesel / Biodiesel
Battery
Battery
12V
Electric
Electrical
12-volt, 585 CCA battery and 40 amp alternator
Wheels & Tires
Tires, Front Specification
26.5" x 14" - 12", 6-ply
Tires, Rear Specification
20" x 12" - 10", 6-ply
Operational
Operating Conditions
Mowing Rate (Productivity): Up to 6.4 acres/hr (2.6 hectacres/hr)
Operating Speed
Ground Forward / Reverse: 0 - 10 mph (0 - 16.1 km/h) / 0 - 4 mph (0 - 6.4 km/h) | Mowing: 0 - 7 mph (0 - 11.3 km/h)
Chassis
Frame Type
All welded formed-steel frame with integral tie-down anchors.
Dimensions
Dimensions
Ground Following: 6" (15.3 cm) anti-scalp cups on each blade
Ground Clearance
5" (12.7 cm)
Height
86" (215 cm) with 2-post ROPS | of Cut: 0.75” - 4” (1.9 cm - 10.2 cm) in 0.25” (0.6 cm) increments.
Length
126" (320 cm)
Overall Width
96.3" (245 cm) (outside of decks)
Transport Width
88.3" (224 cm) (outside of front tires) | Rear track: 54" (137 cm
Wheelbase
60" (152.4 cm)
Cutting Width
90” (229 cm)
Capacities
Fuel Capacity
13.5 U.S. gal. (51.1 L)
Hydraulic Capacity
14 U.S. gal. (53 L)
Oil capacity
5.5 U.S. qt. (5.2 L)
Weights
Weight
raction Unit Weight: 3,205 lbs (1454 kg) - with full fluids and 5 cutting units. Cutting Unit Weight: 140 lbs (64 kg) – single cutting unit assembly only.
Features
Features
Blade Style/Type: Rotary | Number of Blades: 5 | Hydraulic Fluid Type: Toro PX™ Extended Life Hydraulic Fluid | Interlocks: Traction pedal, operator presence in seat, PTO engage or disengage, and cutting deck mow or transport safety interlock switches. Parking break set prohibits movement through traction pedal. | Cutting Unit Type/Configuration: Five Contour™ Plus 22” (55.9 cm), rear-discharge rotary cutting units with rear roller on each deck. 90” (229 cm), overlap 5” (12.7 cm), overhang 1” (2.5 cm)
Construction Material, Deck
Cutting chamber is 10-gauge steel constructed chambers with 12-gauge welded reinforcements. Spindle support is 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels. Cutting unit frame is welded 1.5” (3.8 cm) square x 0.25” (0.6 cm) wall tube with 7-gauge side supports. Spindle support 3/16” (0.48 cm) high-strength steel and 10-gauge exterior channels.
Cooling System
Description: Rear-mount, cross-flow 7-row radiator with 6.3 fins per inch, 5.5 quart (5.2 liter) capacity.
Seat Type
Mechanical suspension seat standard with pivoting LH armrest, pivoting RH control arm and retractable seat belt.