2023 SCAG Power Equipment Cheetah II SCZII-61RD-38FX-EFI

2023 SCAG Power Equipment Cheetah II SCZII-61RD-38FX-EFI

Swipe to View More

  • Year 2023
  • Make SCAG Power Equipment
  • Model Cheetah II
  • Engine Model: FX Series EFI
2023 SCAG Power Equipment Cheetah II SCZII-61RD-38FX-EFI

2023 SCAG Power Equipment Cheetah II SCZII-61RD-38FX-EFI

2023 SCAG Power Equipment Cheetah II SCZII-61RD-38FX-EFI

OUTCLASS. OUTPERFORM. OUTRUN.

In your world, it pays to become more swift, agile and powerful. Make it a reality with the quick and precise Cheetah II™, a machine that devours jobs at a pace you’ve only dreamed of while delivering an unmatched quality-of-cut and incredibly smooth ride. With the Cheetah II, you’ll never be caught from behind.

Features may include:

61" OR 72" CUTTING WIDTH
  • The envy of the industry, Velocity Plus™ decks deliver an amazing quality-of-cut and a wide, even discharge. This deck is equipped with Scag’s ultra-tough cast-iron spindles featuring tapered roller bearings and a top-mounted grease fitting with a relief valve to prevent over-greasing.
STRONG, ADJUSTABLE CLUTCH FOR LONG LIFE
  • The Ogura GT5 PTO Clutch Brake provides excellent starting and stopping power for the cutter deck, 350 ft. lb. of holding strength, and an adjustable air gap for long life.
SOLID DESIGN FOR YEARS OF DEPENDABLE SERVICE
  • The Cheetah™ is ultra-strong and built for long life. It has a wide mower stance and extra-low center of gravity for ultimate stability and a replaceable front caster-wheel weldment.
SPEEDS UP TO 16 MPH!
  • Two-speed ZT-5400 transaxle lets you choose either Low Range to travel up to 12 mph or High Range for up to 16 mph. Internal 16 cc pumps and 21 cc motors help provide speed, power and torque. The transaxle’s design greatly reduces hoses and possible leak points.
MORE UPTIME
  • Flip-up components, easy-to-reach grease Zerks and many more features make servicing the Cheetah™ simple, so you can be in the shop less and on the job more.
UNPARALLELED COMFORT
  • With five settings from soft to firm, the Operator Suspension System isolates the operator from the effects of rough terrain, providing unmatched comfort without sacrificing quality-of-cut. A coil-over shock provides effective suspension action right where it’s needed, and only where it’s needed. The seat’s 4-point, rubber iso-mounting provides even more shock absorption, maximizing your comfort, hour after hour.
KEEP A REAL-TIME "EYE" ON IMPORTANT SYSTEM FUNCTIONS
  • Depending on the mower model and engine selection, the Tiger Eye™ Advanced Monitoring System monitors a wide variety of systems in real-time, giving you valuable information in just a glance, right from the operator’s seat.
KEEP YOUR DEVICE CHARGED AND READY
  • 12-volt outlet for added convenience allows operators to plug in small accessories or keep their phones at full charge.
HUGE POWER, UP TO 38 HP
  • Choose either a powerful, 38HP Kawasaki® or 37HP Briggs Vanguard™ air-cooled; electronic fuel injection (EFI) engine. Rear-Discharge model features 31HP Kawasaki FX engine.

Engine

Engine Manufacturer Kawasaki®
Engine Model: FX Series EFI
Engine Power 38.5 HP

Motor

Motor Type Internal Motor: 21 cc

Fuel System

Fuel Injection electronic

Drivetrain

Drive System Hydro-Gear ZT5400 Transaxle. Two-Speed

Brakes

Parking Brake Foot-operated pedal

Wheels & Tires

Tires, Rear Specification 24" x 12"-12"
Wheels, Caster Specifications 13" x 6.5"-6"

Operational

Operating Speed Forward Ground: 16 mph (high-speed) / 12 mph (low-speed) | Reverse Ground: 8 mph (high-speed) / 5 mph (low-speed)

Hydraulics

Pump Type Internal Pump: 16 cc

Dimensions

Length 87"-91.25"
Width (chute down): 73.5" | (chute in transport position): 62.75"
Height (ROPS down): 49.5" | (ROPS up): 67" | Cutting: 1.25" to 5" in .25" increments
Cutting Width 61"

Capacities

Fuel Capacity Total: 13 gallons

Weights

Weight 1,364-1,392 lb

Features

Features Deck Type: Velocity Plus™ | Deck Lift: Adjustable foot-operated pedal | Blade Engagement: Ogura GT5 (350 ft lb) / Adjustable air-gap for extended life.
Seat Type 4-point iso-mounted mid-back mounted on operator-suspension platform
Construction Material, Deck Tri-plate cutter deck constructed of 3 steel plates totaling nearly 1/2" of steel. Reinforcement plates at cutter deck spindles.
Spindle Type Cast-iron housing with tapered roller bearings.

Product Photography