2023 SCAG Power Equipment Skid-Mount Base

Information

2023 SCAG Power Equipment Skid-Mount

MAKE A STAND

With a steel beveled intake nozzle that makes debris pickup easy and ambidextrous handle for enhanced maneuverability, it’s time to stand your ground with the Skid-Mount. Its welded-steel impeller with 3/8?-thick steel blades are balanced for reduced vibration and put less stress on the engine—delivering performance for years to come.

Features may include:

FABRICATED AND BALANCED, 20-INCH, 4-BLADE IMPELLER
  • Within the unit’s 6?-wide housing is a welded-steel impeller with 3/8?-thick steel blades. Dynamically balanced for reduced vibration, longer life and less stress on the engine, these loaders boast an effective, high-output (up to 3,075 CFM), debris-reducing design.
EASY ACCESS FOR WEAR PLATE AND IMPELLER SERVICE
  • 1/4?-thick, bolt-in, replaceable wear liner extends service life. Removable rear-housing cover allows easy access to impeller and wear plates.
SAFE AND CONVENIENT TRANSPORT
  • Transport lock safely secures the boom arm and hose when not in use; nylon bearing delivers smooth movement. A transport pin locks the nozzle to the loader to help protect the hose during transportation. Quick-detach hose also allows for quick and easy transport, storage and cleaning.
EASY HANDLING FROM EITHER SIDE: THE CHOICE IS YOURS
  • Padded, large-diameter handle is designed for increased leverage and easy maneuverability.
TAKE IT ALL IN
  • Large, replaceable intake nozzle is beveled to make debris pickup easy.
STANDARD 4" SKID RISERS
  • Four-inch skid risers with fork pockets have multiple install points to fit a wider variety of applications, or they can be completely removed.
18 HP VANGUARD V-TWIN
  • Powered by an 18 hp Vanguard® gasoline, V-twin engine with electric start.

Photos

Highlights

  • Fergus, Ontario
  • 2023
  • SCAG Power Equipment
  • Skid-Mount Base
  • Available
  • Impeller: 5.25" | Blower Housing: 6"
  • 74.25" (without skid or hitch mount attached)

Specifications

  • 2023
  • SCAG Power Equipment
  • Skid-Mount
  • Base
  • General
  • Construction: 4-blade, 3/8"-thick blades, all-steel, welded | Mounting: Tapered locking hub
  • mounted metal tank
  • CFM Output: 3,075
  • All-steel, welded
  • Discharge Tube Diameter: 7" | Hose: 10"-diameter intake hose
  • 20"
  • Impeller: 5.25" | Blower Housing: 6"
  • Hose: 120"
  • 74.25" (without skid or hitch mount attached)
  • Total: 1.75 Gallons
  • 437 lb
  • Blower Housing Wear Plates: Standard: 1/4"-steel, replaceable | Hose Specifications: 0.045 black thermoplastic rubber, wire helix with wearstrip | Unit Mounting: 4" steel skid risers | Throttle Control: Commercial-grade, all-steel mechanicals, plastic debris cover
  • Blower Housing Construction: Removable back panel for easy impeller and wear plate access
  • Tube: Clear thermoplastic
  • 2-Year Commercial; 2-Year Non-Commercial; 90-Day Rental