2023 SCAG Power Equipment Industrial Tow-Behind TLB25-37CH

Information

2023 SCAG Power Equipment Industrial Tow-Behind TLB25-37CH

LEAVE THE REST. GET THE BEST.

When the best demand the best, it’s time for the toughest and most powerful: the Scag® Industrial Tow-Behind Truck Loader. No matter the job—from landscaping and municipal operations to golf courses—this machine features the commercial-grade size and performance needed to get the job done. Leave the rest behind and work with the best.

Features may include:

FABRICATED AND BALANCED, 25-INCH, 4-BLADE IMPELLER
  • Within the unit’s 10.5?-wide housing is a welded-steel impeller with 1/2?-thick steel blades. Dynamically balanced for reduced vibration, longer life and less stress on the engine, these loaders boast an effective, high-output (35BV = up to 6,781 CFM; 37CH = up to 6,909 CFM; 49KBD = up to 7,318 CFM), debris-reducing design.
EASY ACCESS FOR WEAR PLATE AND IMPELLER SERVICE
  • 1/4?-thick, bolt-in, replaceable wear liner extends service life. Removable rear-housing cover allows easy access to impeller and wear plates.
SAFE AND CONVENIENT TRANSPORT
  • Transport lock safely secures the boom arm and hose when not in use; nylon bearing delivers smooth movement. A transport pin locks the nozzle to the loader to help protect the hose during transportation.
EASY HANDLING FROM EITHER SIDE: THE CHOICE IS YOURS
  • Padded, large-diameter handle is designed for increased leverage and easy maneuverability.
TAKE IT ALL IN
  • HUGE, replaceable intake nozzle makes debris pickup easy.
FIT TO YOUR TRUCK – LONG OR SHORT, HIGH OR LOW
  • Choose from three different tongue lengths to best fit your specific application. A height-adjustable hitch gives the best fit your truck. A 2 5/16? ball coupler comes standard on gas-powered units, but will accept a pintle hitch. Diesel-powered unit comes with standard pintle hitch, but will accept a 2 5/16? ball coupler.
KEEP YOUR RAKES, BROOMS AND SHOVELS WITHIN EASY REACH
  • Built-in, 3-hole tool holder with rubber rings protects handles from damage.
HOURS AND HOURS OF RUN TIME
  • High-capacity, 8.5-gallon, steel fuel tank with large filler neck for easy filling keeps you on the job. Built-in fuel gauge adds convenience and eliminates guesswork.
HUGE POWER, UP TO 49 HP
  • Choose from a 35 hp Vanguard® BIG BLOCK™ or a 37 hp Kohler® Command PRO® EFI gasoline engine, or a 49 hp Kubota® diesel engine.

Photos

Highlights

  • Fergus, Ontario
  • 2023
  • SCAG Power Equipment
  • Industrial Tow-Behind TLB25-37CH
  • Model: Command PRO®, V-Twin
  • Available
  • Impeller: 9" | Blower Housing: 10.5" | Trailer: 66.75"
  • 121.25"

Specifications

  • 2023
  • SCAG Power Equipment
  • Industrial Tow-Behind
  • TLB25-37CH
  • General
  • Model: Command PRO®, V-Twin
  • Kohler®
  • 37 HP
  • Construction: 4-blade, 1/2"-thick blades, all-steel, welded | Mounting: Straight bore
  • Electric
  • plastic tank with built-in fuel gauge
  • 205 / 75 D15 highway tires with steel wheels
  • CFM Output: 6,909 | Blower Tilt Angle: 2-degree tilt at discharge; allows blower to more effectively get under wet, heavy debris
  • All-steel, welded
  • Unit Mounting Hitch: at least 10,000 lb rating
  • Discharge Tube Diameter: 12"
  • 25"
  • Impeller: 9" | Blower Housing: 10.5" | Trailer: 66.75"
  • Discharge Tube: 84"
  • 121.25"
  • Total: 8.5 Gallons
  • 1,700 lb
  • Model: TLB25-37CH | Blower Housing Wear Plates: Standard: 1/4"-steel, replaceable | Intake Hose Specifications: 84" length, 16"-diameter intake hose, 0.045 blue polyurethane rubber, wire helix with wearstrip | Throttle Control: Commercial-grade, all-steel mechanicals | Highway Ready: standard roadside package, including wheel chocks and cones | Axle: Heavy-duty Dexter Torflex® axle (3,500 lb)
  • Blower Housing Construction: Removable back panel for easy impeller and wear plate access
  • Tube: Clear thermoplastic
  • 2-Year Commercial; 90-Day Rental